MSO/DS2000A option bundle including MEM-DS2000, AT-DS2000, SD-DS2000, CAN-DS2000. Special bundle available for a limited time. This option enables deep memory, serial decoding including CAN bus as the advanced triggering options listed in the User's Guide.
$352
BW2T3-MSO/DS4000
Bandwidth upgrade form 200MHz to 350MHz for MSO/DS402x
$4,431
BW2T5-MSO/DS4000
Bandwidth upgrade form 200MHz to 500MHz for MSO/DS402x
$8,308
BW3T5-MSO/DS4000
Bandwidth upgrade form 350MHz to 500MHz for MSO/DS403x
$3,877
CB-NM-NM-75-L-12G
N(M)-N(M) RF Cable
$263
CB-NM-SMAM-75-L-12G
N(M)-SMA(M) RF Cable
$263
CK-DS6000
1 to 5 BNC Cable set for scope calibration
$67
DG5000 Pro-IQ
DG5000 Pro IQ Modulation Option
$447
DG5000 Pro-MPUL
DG5000 Pro Multi-pulse Output Option
$447
DG5000 Pro-MTONE
DG5000 Pro Multi-Tone Option
$447
DG5000 Pro-PJ
DG5000 Pro Pattern Generator Option
$447
DG5000 Pro-SEQ
DG5000 Pro Advanced Sequence Function
$447
DG70000-DC
DG70000 DC Amplifier Output
$2,850
DG70000-DIGUP
DG70000 Digital Up Converter (DUC) and IQ Modulation
$11,344
DG70000-MTONENL
DG70000 Multitone & Chirp Mode
$8,741
DHO5000-AEROA
MIL-STD-1553 Bus Trigger and Decoding Option
$514
DHO5000-AUDIOA
I2S Audio Bus Trigger and Analysis Option
$514
DHO5000-AUTOA
CAN/CAN-FD, LIN Bus Trigger and Decoding Option
$514
DHO5000-FlexA
FlexRay Trigger and Decoding Option
$514
DHO5000-PWRA
Power Analysis Option
$514
DHO5004-BWU05T10
500 MHz to 1 GHz Bandwidth Upgrade Option (4-CH DHO)
$2,108
DHO5008-BWU05T10
500 MHz to 1 GHz Bandwidth Upgrade Option (8-CH DHO)
$4,049
DIGITALIO-DP800
Four channels for trigger in & out option for the DP800 Family
$143
DS7000-BND
7000 Series Function and application bundle option including PWR, AWG, and all Serial Decode options. AWG option only works on MSO models.
$2,639
DS7000-EMBD
7000 Series Embedded serial bus trigger and analysis (I2C, SPI)
$1,187
DS80000-AEROA
DS80000-AEROA - MIL-STD-1553 Serial Bus Triggers and Decoding
$3,124
DS80000-AUDIOA
DS80000-AUDIOA - Audio Serial Bus Trigger and Decoding (I2S)
$3,124
DS80000-AUTOA
DS80000-AUTOA - Auto Serial Bus Trigger and Decoding (CAN, CAN-FD, LIN, FlexRay)
$3,124
DS80000-EMBDA
DS80000-EMBDA - Embedded Serial Bus Trigger and Decoding (RS232/UART, I2C, and SPI)
$3,124
DS80000-ENETC
DS80000-ENETC - 100M/1000M Ethernet Compliance Test
Analog Modulation Option for the DSG5000 - Modulate amplitude, frequency, and phase
$3,563
DSG5000-PUM
Pulse modulation option for the DSG5000 Series RF signal sources
DSG800-PUM
Pulse modulation option for the DSG800 Series RF signal sources
$830
High Impedance Adapter
High Impedance Adapter - High-impedance Probe Adapter, 3.5 mm to BNC (1 MΩ)
$3,670
M3A2B
Analog bus to banana jack cable for M300 system mainframe. For direct external connection of DM3065 DMM module to external signal.
$28
M3GPIBCONNECTOR
GPIB Reverse connection adaptor for M300 mainframe.
$99
M3TB16
Terminal block accessory for M300 DAQ system modules with model numbers ending in 16.
$98
M3TB20
Terminal block accessory for M300 DAQ system modules with model numbers ending in 20.
$108
M3TB24
Terminal block accessory for M300 DAQ system modules with model numbers ending in 24.
$98
M3TB32T
Terminal Box for MC3132(Dedicated to temperature test)
$100
M3TB34
Terminal block accessory for M300 DAQ system modules with model numbers ending in 34.
$98
M3TB48
Terminal block accessory for M300 DAQ system modules with model numbers ending in 48.
$98
M3TB64
Terminal block accessory for M300 DAQ system modules with model numbers ending in 64.
$98
MC3065
DMM Module for M300 DAQ System. Already included in M301 and M302.
$737
MC3324
24 channel multiplexer module for use with M300 DAQ System Mainframe and MC3065 DMM module. This card has 20 voltage channels configurable for 2 or 4 wire measurements and 4 current only measurement channels. The M3TB24 is the mating terminal block for this module.
$756
MC3534
Multifunction module for use with M300 DAQ System Mainframe. It includes 4 DACs, 4 Totalizers, and 32 DIO bits. The M3TB34 is the mating terminal block for this module.
$841
MHO2000-AEROA
MHO2000-AEROA - MIL-STD-1553 bus triggering and decoding option
$197
MHO2000-AUDIOA
MHO2000-AUDIOA - I2S audio bus triggering and analysis option
$197
MHO2000-AUTOA
MHO2000-AUTOA - CAN-FD, LIN bus triggering and decoding option
$197
MHO2000-FLEXA
MHO2000-FLEXA - FlexRay triggering and decoding option
$197
MHO2000-PWRA
MHO2000-PWRA - Power analysis option
$197
MHO5000-AEROA
MIL-STD-1553 Bus Trigger and Decoding Option
$514
MHO5000-AUDIOA
I2S Audio Bus Trigger and Analysis Option
$514
MHO5000-AUTOA
CAN/CAN-FD, LIN Bus Trigger and Decoding Option
$514
MHO5000-FlexA
FlexRay Trigger and Decoding Option
$514
MHO5000-PWRA
Power Analysis Option
$514
MHO5004-BWU05T10
500 MHz to 1 GHz Bandwidth Upgrade Option (4-CH MHO)
$2,108
MHO5006-BWU05T10
500 MHz to 1 GHz Bandwidth Upgrade Option (6-CH MHO)
$4,049
PA-DSA1030
Preamplifier option (only for DSA1030 or DSA1030-TG)
$904
PA-DSA832
Preamplifier option, 100kHz to 3.2GHz (only for DSA832, DSA832E, DSA832E-TG, or DSA832-TG)
$862
PA-DSA875
Preamplifier option, 100kHz to 7.5GHz (only for DSA875 or DSA8375-TG)
$862
PCA1030
50 MHz, 30 A Current Probe for 7000, 8000, or DHO4000 Series Oscilloscopes
Rack Mounting Kit for ONE DG1000Z Series Generator. Also works with DSG800 and DG2000 Series. May be different than image. DG1Z rack kits contain mounting ears rather than a shelf or enclosure.
Rack Mounting Kit for TWO DG1000Z Series Generators. Also works with DSG800 and DG2000 Series. May be different than image. DG1Z rack kits contain mounting ears rather than a shelf or enclosure.
Rack Mounting Kit for a DS1000Z Series Oscilloscope or DG4000 Series generator. May be different than image. Rack kits are different for each instrument.
EMI PreCompliance Software for RIGOL Spectrum Analyzers. Requires EMI option to be enabled on the instrument. Does NOT work with RSA3000E models. Only supported by RSA3000 models.
Real Time signal capture option for the spectrum analyzer. Enables 1.5 MHz of real time capture for signals like FSK. Works on the DSA700 series and the DSA815 or DSA815-TG.
$276
T2R1000
Active probe adaptor for connecting TekProbe-BNC probes to a DS6000 or MSO/DS4000
Full advanced version of UltraStation wave generation software for DG1000Z, DG4000, DG5000 Series generators as well as DS1000Z and DS2000A "-S" embedded generators. This is a software upgrade license.
VSWR Bridge and DSA800-VSWR software for Rigol Spectrum Analyzers. The VB1080's range is from 2-8 GHz. *SW does NOT work with DSA1000 Family. Requires TG Option.
16M Arb memory Depth Option for the DG1000Z series generators
$238
BAG-DS1000
Instrument Carry Case for a DS1000 Series Oscilloscope
$77
BAG-G1
Instrument Carry Case for a DSA800 Spectrum Analyzer, DG4000 generator, or DS2000 scope.
$205
CB-60A-780MM
Load input 60 A cable. Cable is 30 inches long.
$51
DG5000 Pro-BND
DG5000 Pro BND Option
$1,319
DG70000-PJ
DG70000 High-speed Serial Function
$13,125
DG800 Pro-3RL
8M upgrade option for DG800 Pro Series Generators
$104
DG800-ARB8M
Memory Depth Upgrade Option to 8 Million points
$91
DG900 Pro-3RL
32M upgrade option for DG900 Pro Series Generators
$381
DHO1000-RLU-01
DHO1000 Series Deep Memory Upgrade License to 100 MPts memory
$167
DHO4000-BND
DHO4000 Series Options Bundle includes all Serial Decode & Power Analysis Options
$527
DHO5000-BND
Bundle Option
$1,550
DP2000-10A
CH3 10 A high range mode
$263
DP900-HIRES
DP900 Series High Resolution Option (for DP932E and DP932U)
$157
DS7000-2RL
7000 Series extend maximum memory depth up to 250 Mpts
$1,187
DS8000-R-BND
Application Bundle including all the serial protocol analysis software, Power Analysis, Waveform Generator, and Jitter/Real time Eye options for the DS8000-R Series
Pulse Train Generator option for DSG3000B Signal Generators
$395
DSG5000-PUG
Pulse Train Generator Option for the DSG5000
$3,035
DSG800-PUG
Pulse Train Generator option for the DSG800 Series RF signal sources. Includes DSG800-PUM license automatically.
$1,080
FH-DG5000
Frequency hopping software license option for DG5000 series AWG
$3,019
HIRES-DP700
1mV / 1 mA Resolution option for the DP700 Series power supplies
$78
HIRES-DP800
1mV/1mA Resolution Option for DP800 Family
$143
LD-DM
TEST LEAD SET FOR DMM
$46
MC3132
32 channel differential Multiplexer module for use with M300 DAQ System Mainframe and MC3065 DMM module. Configurable for 2 or 4 wire measurements. The M3TB32 is the mating terminal block for this module.
20 channel differential Multiplexer module for use with M300 DAQ System Mainframe and MC3065 DMM module. Configurable for 2 or 4 wire measurements. The M3TB20 is the mating terminal block for this module.
$511
MHO2000-AWG
MHO2000 AWG - Built-in dual-channel 50 MHz function signal generator option
$277
MHO5000-AWG
Built-in Dual-Channel 50 MHz Function Signal (4-CH MHO only)
$415
MSO5000-BND
MSO5000 Series Function and application bundle option including PWR, AWG, and all Serial Decode options.
$923
MSO8000-JITTER
Jitter and Real-Time Eye Diagram Analysis Option
$1,319
PA1011
10W POWER AMPLIFIER FOR GENERATORS. Requires generator to function.
40 MHz Real Time Bandwidth Option for the RSA5000 Series Real Time Spectrum Analyzers. RSA5000s come standard with 25 MHz Real Time Bandwidth. License code is emailed and user installed.
USB-GPIB Converter. Connect USB directly to instrument and control it via GPIB. This does not connect to a PC directly. "-L' Model for DL3000, DG800, and DG900 series.