RSA3000 Series   |  Spectrum Analyzers

RSA3000
Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.  Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems.  The RSA3000 combines Real-Time performance (7.45µs 100% POI with 40 MHz RTBW option), rich data displays, and advanced triggering all at an exceptional price. 
Product Feature Customer Benefit
  DANL as low as -161 dBm with optional preamp View lower powered signals (harmonics, interference sources) and ease trouble-shooting in swept and real-time mode.
View lower powered signals (harmonics, interference sources) and ease trouble-shooting in swept and real-time mode.   Using the optional PreAmplifier the RSA3000 enables engineers to accurately view signals down to a noise floor of -161 dBm. In addition to locating and isolating lower power signals across the spectrum, this makes it possible to more precisely characterize all of the critical RF components within the transceiver design including attenuators, filters, mixers, and antennas.
  1 Hz optional Minimum Resolution Bandwidth (RBW) Provides high resolution to separate signals with close frequencies enabling easier signal identification for characterization and advanced measurements.
Provides high resolution to separate signals with close frequencies enabling easier signal identification for characterization and advanced measurements.   Analyzing signals that are close together in frequency is critical to validation of many RF devices and systems. With the RSA3000, sweep a signal bandwidth with a RBW setting of just 10 Hz or add the RSA3000-BW1 option and set it to 1 Hz RBW to view additional detail on close signals.
 
  1 ms full span sweep Utilize the fast 1 millisecond full span sweep to quickly identify signals of interest.
Utilize the fast 1 millisecond full span sweep to quickly identify signals of interest.   Quickly evaluating a broad spectrum for signals of interest and possible signs of interference or unwanted transmissions can be time consuming as many of these signals are moving to shorter and shorter durations. The RSA3000 makes a full span sweep in just 1 ms making it possible to capture many of these signals on the first pass and quickly get a more comprehensive understanding of the local transmissions before moving to real-time for additional analysis.
  Up to 40 MHz of Real-Time BW View wider band and hopping signals at one time without additional setup making identifying and analyzing signals of interest faster and easier.
View wider band and hopping signals at one time without additional setup making identifying and analyzing signals of interest faster and easier.   Engineers debugging time is a critical resource in any new design process. RF debugging is already a complicated challenge. Expanding the Real-Time bandwidth of the RSA3000 Series Analyzer to 25 or 40 MHz with the RSA3000-B25 or RSA3000-B40 options to make it faster and easier to capture, isolate, and debug wider bandwidth signals with a single setup.
  7.45 µs 100% POI Capture pulsed transmissions as short as 7.45 µs with guaranteed capture and power accuracy.
Capture pulsed transmissions as short as 7.45 µs with guaranteed capture and power accuracy.   Probability of Intercept is an important specification for any serious Real-Time Spectrum Analyzer. It is the only way to know if your power measurements are accurate given a signal’s on time. Many Real-Time analyzers leave this value unspecified or make it dependent on the PC, but the RSA3000’s platform makes it possible to specify a 100% POI as low as 7.45 µs with the 40 MHz RTBW option enabled and to specify how that changes based on real-time span and RBW settings. Use these specifications to confidently capture and make power measurements of short duration transmissions.

Product Details

RSA3000 with Callouts

Specs

Please scroll to the sides when using small displays
Model FrequencyDANLPhase NoiseRBW Price (CAD)
RSA3030 3 GHz-161 dBm-102 dBc/Hz10 Hz $6,320
RSA3030-TG 3 GHz-161 dBm-102 dBc/Hz10 Hz $7,481
RSA3045 4.5 GHz-161 dBm-102 dBc/Hz10 Hz $7,739
RSA3045-TG 4.5 GHz-161 dBm-102 dBc/Hz10 Hz $9,029

 Interactive Selection Tool

To get started using your instruments over the bus download UltraSigma instrument communication software or for older instruments or customized installations review the How to Guide:
Using VISA and drivers to communicate with instruments

For help writing your own programs for our instruments review the programming manual or contact us directly.

Firmware

Drivers

Software

Please scroll to the sides when using small displays
USB Cable

Instrument Cover

Instrument Quick Guide

Calibration Certificate

Power Cord

Please scroll to the sides when using small displays

PreAmplifier

RSA3000-PA
RSA3000 Pre-amplifier

 

$329

EMI Settings

RSA3000-EMC
RSA3000 EMI Filter and Detector

 

$644

Advanced Measurements

RSA3000-AMK
RSA3000 Advanced Measurement Kit

 

$773

Real Time BW

RSA3000-B25
RSA3000 Real-Time Analysis Bandwidth extend to 25 MHz

 

$1,160

Real Time BW

RSA3000-B40
RSA3000 Real-Time Analysis Bandwidth extend to 40 MHz

 

$1,934

Resolution BW

RSA3000-BW1
RSA3000 - Extend Swept RBW down to 1 Hz

 

$515

Please scroll to the sides when using small displays

Spectrum Analyzer Software

Ultra Spectrum
Software for controlling and analyzing data from RIGOL spectrum analyzers.

 

$344

EMI Software

S1210 EMI Pre-compliance
EMI PreCompliance Software for RIGOL Spectrum Analyzers. Requires EMI option to be enabled on the instrument.

 

$644

Please scroll to the sides when using small displays

GPIB Adaptor

USB-GPIB
USB-GPIB Converter. Connect USB directly to instrument and control it via GPIB. This does not connect to a PC directly.

 

$447

Utility Kit

DSA Utility Kit
DSA Accessories Package including cables, adaptors, and antennas.

 

$1,072

VSWR Bridge

VB1040
800 MHz to 4 GHz VSWR Bridge with DSA8-VSWR software for DSA800 Spectrum Analyzers. *SW does NOT work with DSA1000 Family. Requires TG Option.

 

$1,191

VSWR Bridge

VB1032
VSWR Bridge with VSWR-DSA800, VSWR-DSA1000 licenses included. Requires TG Option. Frequency range: 1 MHz - 3.2 GHz, Typical Directivity: >= 25 dB

 

$851

VSWR Bridge

VB1080
VSWR Bridge and DSA800-VSWR software for Rigol Spectrum Analyzers. The VB1080's range is from 2-8 GHz. *SW does NOT work with DSA1000 Family. Requires TG Option.

 

$947

RF Adaptor Kit

RF Adaptor Kit
RF Cable and adaptor kit

 

$406

RF CATV Kit

RF CATV Kit
Kit Includes 50 to 75 Ohm Adaptors (2pcs)

 

$541

RF Attenuator Kit

RF Attenuator Kit
Kit Includes 6dB Attenuator (1pcs), 10dB Attenuator (2pcs)

 

$676

High Power Attenuator

ATT03301H
30dB High Power Attenuator, Max Power 100W

 

$297

N Type Cable

CB-NM-NM-75-L-12G
N(M)-N(M) RF Cable

 

$257

SMA Cable

CB-NM-SMAM-75-L-12G
N(M)-SMA(M) RF Cable

 

$257

Near Field Probe Kit

NFP-3
Near Field Probe Kit

 

$644

Rack Mount Kit

RM6041
Rack Mounting Kit for a RSA5000 Series Spectrum Analyzer

 

$386

High Accuracy Clock

OCXO-C08
High Stability Clock option for the RSA5000 series. Improves clock aging rate from <1 ppm/year to <0.03 ppm/year.

 

$1,031