The RIGOL UltraReal Vector Network Analyzers

A Powerful and Flexible solution for today's challenging RF environments

 

The new RIGOL Vector Network Analysis mode adds significant capability to our RSA family of Spectrum Analyzers.  Customers needing to characterize active or passive components, identify signal path errors or tune antennas will benefit from the complete VNA solution.  Supports the following:

  • S11 - Reflection Coefficient
  • S21 - Forward Transmission
  • Distance to Fault

 

The VNA Mode comes with a rich visualization set to quickly identify and resolve problems with your RF Designs

  • Smith Chart
  • Return Loss
  • Standing Wave Ratio
  • Phase Delay
  • Insertion Loss
  • Group Delay
  • Return Loss
  • Distance to Fault

The RSA3000N - Real-time RF analysis and Vector Network Analysis at an unprecedented price

  • Spectrum analysis from 9kHz to 4.5Ghz
  • DANL: <-161 dBm (typical)
  • Phase noise: <-102 dBc/Hz (typical)
  • Level measurement uncertainty: <1 dB
  • Min. RBW 1 Hz
  • Up to 40 MHz real-time analysis bandwidth
  • 7.45  µsec 100% POI (at 40MHz)
  • Advanced measurement functions
  • VSA measurement application (option)
  • EMI measurement application (option)
  • VNA measurement application New (standard)

Starting at just $2299 USD

The RSA5000N - Real-time RF performance for mainstream IoT applications

  • Spectrum analysis from 9kHz to 6.5Ghz
  • DANL: <-165 dBm (typical)
  • Phase noise: <-108 dBc/Hz (typical)
  • Level measurement uncertainty: <0.8 dB
  • Min. RBW 1 Hz
  • Up to 40 MHz real-time analysis bandwidth
  • 7.45  µsec 100% POI (at 40MHz)
  • Advanced measurement functions
  • VSA measurement application (option)
  • EMI measurement application (option)
  • VNA measurement application New (standard)

Making an S21 Measurement with the RIGOL RSA

A "Forward Transmission” S-Parameter, known as an S21,  describes how energy passes through a network.  To make the measurement a signal is put into port 1 and measured at port 2.  This is important when characterizing the performance of passive components like attenuators, splitters, and filters.  See how easy it is to make an S21 measurement using the RIGOL Vector Network Analyzer

 

  

Making a DTF Measurement with the RIGOL RSA

A "Distance to Faultmeasurement is a frequency domain reflective test used to identify signal path degradation and faults.   It is useful debugging communications system and completing cable test as well as optimize performance and throughput of a network.  See how the RIGOL Vector Network Analyzer lets you quickly complete DTF tests and identify root cause failures.

 

  

Making an S11 Measurement with the RIGOL RSA

A "Reflection Coefficient” S-Parameter, known as an S11,  describes how energy is reflected back to a transmiting port.  To make the measurement a signal is put into port 1 and measured at port 1.  This is important when characterizing the performance of active components like amplifiers and debugging signal integrity issues.  See how easy it is to make an S11 measurement using the RIGOL Vector Network Analyzer

  

Calibrating you RSA for Vector Network Analysis

Making accurate VNA measurements requires precise instrument calibration.  With the RIGOL calibration kits and a customizable UI it is quick and simple to set up your instrument with our kit or via a user defined calibration setup.  See how easy it is to calibrate the RIGOL VNA in order to insure accurate and repeatable results. 

  

IoT Design Challenges Seminar
Register to check out our new IoT Webinar Series.
Topics Include:
  • Debugging Serial Communication
  • RF Sensor Integration and Demodulation
  • Characterizing Power Requirements
Register Here